NikWax | Nubuck & Suede Proof

NikWax
Availability:
Usually Ships Within 48 Hours
£4.99
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

NikWax | Nubuck & Suede Proof 125ml

High performance waterproofer desinged to maintain texture and breathability of nubuck and suede footwear. Easy to apply by hand, non flammable and PFC free.

For waterproofing footwear
  • Easy to use sponge-on and spray-on waterproofing for all nubuck and suede footwear
  • Adds water repellency, revives breathability and maintains the texture of your footwear
  • Enhances the performance of your footwear, keeping your feet warmer and drier.
  • Recommended for Gore-Tex® and eVent®, Sympatex ® and all other waterproof Nubuck and Suede footwear

 

Use Nikwax Nubuck & Suede Proof when your footwear soaks up water...

 

Your footwear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Footwear Cleaning Gel™, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the footwear has been thoroughly worn you will need to add DWR, using Nikwax Nubuck & Suede Proof™, after cleaning first with Nikwax Footwear Cleaning Gel™.

Cleaning properly can be as important as waterproofing…

Using the right cleaning product is as important as using the right waterproofing product. Conventional detergents leave behind a thin water-absorbent film on materials, which masks their Durable Water Repellency (DWR). Therefore, always clean your waterproof footwear with Nikwax Footwear Cleaning Gel™. Remember that dirt itself works against DWR, so regular cleaning will enhance performance.

 

IMPORTANT: Shake bottle before use. Always clean first using Nikwax® Footwear Cleaning Gel.

Sponge:

  1. Protect work surface from potential overspray.
  2. Dab sponge to release product. Apply to clean, wet footwear from a distance of 15cm. Ensure penetration along seams.
  3. After 2 minutes remove excess with a cloth.
  4. Allow to dry naturally before use.

Spray:

  1. Protect work surface from potential overspray.
  2. Apply to clean, wet footwear from a distance of 15cm. Ensure penetration along seams.
  3. After 2 minutes remove excess with a cloth.
  4. Allow to dry naturally before use.

Note: Light/coloured nubuck or suede may darken after treatment. Test on a hidden area first.

Always allow footwear to dry naturally…
  • Leave footwear to dry at room temperature.
  • Paper can be stuffed into the toes to absorb excess moisture, this should be replaced when wet.
  • Keep footwear away from fires and radiators, drying too quickly can crack leather and cause bonded soles to peel.